Guidelines for air conditioner maintenance

posted in: General | 0

Air conditioner maintenance should be done regularly. This includes the service of coils, fins, and drains. AC unit operation needs to be efficient. Service and cleaning of AC units can cause damage and a reduction in cooling power. It’s not just about comfort. It can also be a matter of safety and health.

Humidity control is another benefit of air conditioning. Humidity control is important to prevent mildew and mold growth. Your respiratory health is protected by limiting mold and mildew growth.

These are seven key guidelines for maintaining an air conditioner.

1. Maintenance and cleaning of air filters

Clogged and dirty air filters can significantly reduce the AC system’s cooling capacity and obstruct normal airflow. The filter can become very dirty and the airflow inside will bypass it, bringing dirt to the evaporator coil. This causes the cooling coils to be contaminated. At least once per month, air filter cleaning should be performed. Proper cooling is possible with regular cleaning of the air filters. If you have fur-bearing pets in your home, air filter cleaning is essential.

2.Cleaning Evaporator Coils

Clean air filters prevent dust and dirt from clogging the cooling coils. However, with time, dirt and other debris can build up on the cooling coils. The coils’ heat absorption capacity is reduced by this covering and deposition, which affects the room cooling process. It is important to have your coils cleaned at least once a year.

3.Maintenance of condenser ring

In all AC types, the condenser fan unit and fan unit are located outside of the home. The dusty outside environment, falling leaves, and rain, wind, etc. The condenser coils are contaminated by soil. It is very difficult for hot air and heat outside to escape from the condenser coils due to dust and debris. Poor heat dissipation causes condenser heating and compressor heating (compressor is located near condenser coil). This makes it difficult for the condenser to function efficiently.

4. Cleaning Coil Fins

The aluminum fins can be seen on the coils and condensers. Over the fins, dust and other debris can build up. To protect the condenser and evaporator, it is important to clean the coil fins.

5.Clear the back drain

If the drain at its rear end becomes blocked, water from the AC will collect and then drip into the room through any opening. The humidity inside the room will also increase if the AC unit has no vent.

6.Don’t miss an AC service Call an Air Conditioning Services Brisbane before the summer begins to clean and service your air conditioner. When you call an AC service professional, ensure that he inspects all AC parts such as coils, compressors, fans, and filters. Performs all necessary services.

  1. Replace your air filters

Air filters are used to collect dust, hair, and other contaminants in your HVAC system. These filters keep contaminants out of your HVAC system’s operation.

These filters can become clogged or dirty over time. Icing can cause your air conditioner to work harder than it should. This problem can be prevented by changing your filters every month.

  1. Clear away Bushes and Plants

To function properly, your air conditioner unit must have a free flow of air. Airflow is blocked by bushes, flowers, grasses, and weeds that grow around the unit. This pushes the unit further than it should.

You should get rid of any plants that may be growing around the unit. This ensures that the unit has enough air. This ensures that your home is more efficient.

  1. Make sure you check the Drain Line

The condenser must be drained of excess moisture. The algae growth can cause this drain line to clog.

Preventative maintenance can be done by flushing the lines with a little bleach from one time to another. A cup of bleach will suffice.

A basic wet/dry vacuum can usually remove the obstruction if algae or mold is present.

  1. A Programmable Thermostat is available

People leave their air conditioner on all day to cool an empty apartment or house. Some forget to adjust the thermostat before they go out. This reduces the life expectancy of your air conditioner unit and can also cost you more.

  1. Get professional maintenance

An air conditioner unit can be faulty for many reasons that you don’t see. These things can be checked by a professional technician, which includes:

Electrical components

Mechanical components

Coolant levels

The integrity of the duct

It is important to call a professional once or twice per year to ensure that your air conditioner lasts as long as it can.

AC maintenance is crucial to the performance of your air conditioner unit. Proper airflow and drainage can be ensured by DIY maintenance. Professional maintenance will let you know that both the mechanical and electrical components are still working correctly.

Comments are closed.